Products – Construction

Construction

Acrylic dispersion with carboxyl groups: Low water sensitivity. High level of adhesion plus elevated and long-lasting tack.
Applications: Particularly recommended as a bonding agent between new and old concrete or mortars. Must be manipulated for application (diluting + bactericides…).

pdfTECHNICAL INFORMATION – ADICRIL® PS-82
Download

Acrylic dispersion with carboxyl groups: Low water sensitivity, high level of adhesion and elevated tack.
Applications: As with PS-82, application is recommended as a bonding agent between new and old concretes. Ready to use product.

pdfTECHNICAL INFORMATION – ADICRIL® PS-8240
Download

Acrylic dispersion with carboxyl group: Low water sensitivity, high level of adhesion and very high cohesion maintained with elevated tack.
Applications: Recommended bonding agent for applications that require increased cohesion.

pdfTECHNICAL INFORMATION – ADICRIL® PS-86
Download

Styrene/acrylic dispersion:
Applications: Standard product for use as an imprinted concrete varnish. Gloss finish that can be regulated by formulation.

pdfTECHNICAL INFORMATION – ADICRIL® PS-94 PA
Download

Self-cross-linking acrylic dispersion: Good adhesion on concrete surfaces with a variety of finishes. Excellent resistance to water, with a markedly special hydro-repellent effect.
Applications: Varnish for high performance imprinted concrete.

pdfTECHNICAL INFORMATION – ADICRIL® CPF-710
Download

Self-cross-linking acrylic dispersion: Excellent resistance to water. Polymer with excellent temperature resistance and very low thermoplasticity.
Applications: For the formulation of primers for concrete finishing, both decorative and paving. High performance.

pdfTECHNICAL INFORMATION – ADICRIL® CPF-705
Download

Styrene/acrylic dispersion: Highly resistant to water and alkalis and steam permeable, with residual tack.
Applications: Fixative for degraded surfaces that are subsequently going to be restored.

pdfTECHNICAL INFORMATION – ADICRIL® PS-96
Download

Styrene/acrylic dispersion: Presents elastomeric behaviour, resistant to alkalis and with light residual tack.
Applications: Adherence primers for mortars and plasters. Can be used as a bonding agent between concrete and some types of coatings or mortar.

pdf

TECHNICAL INFORMATION – ADICRIL® PS-7750
Download

Styrene/acrylic dispersion: Good resistance to alkalis and sunlight. Free of residual tack.
Applications: Recommended for priming porous surfaces and rectifying surfaces in bad condition.

pdfTECHNICAL INFORMATION – ADICRIL® PS-5
Download

Acrylic dispersion with incorporated coalescent. Free of residual tack.
Applications: Primers for porous surfaces and the rectifying of surfaces in bad condition.

pdfTECHNICAL INFORMATION – ADICRIL® PS-75
Download

Self-cross-linking acrylic dispersion: Excellent water resistance. Polymer with good temperature resistance and very low thermoplasticity.
Applications: Binder and/or fixative for crushed marble or other aggregates.

pdfTECHNICAL INFORMATION – ADICRIL® CPF-706
Download

Styrene/acrylic dispersion: Elastomeric behaviour: High elasticity with a high recovery index. Light residual tack.
Applications: Product indicated for the “on site” manufacture of elastic membranes for waterproofing. For use in both new build and renovation work.

pdfTECHNICAL INFORMATION – ADICRIL® PS-77
Download

Styrene/acrylic dispersion: Similar behaviour to the product ADICRIL® PS-77 but pH neutral (6.5-8.5).
Applications: Manufacture of elastic membranes.

pdfTECHNICAL INFORMATION – ADICRIL® PS-70
Download

Styrene/acrylic dispersion: Elastomeric behaviour. High tacking.
Applications: Recommended for the manufacture of elastic membranes for which the incorporation of large quantities of aggregates is required without loss of elasticity.

pdfTECHNICAL INFORMATION – ADICRIL® PS-792
Download

Acrylic dispersion: High level of tacking and elasticity.
Applications: Manufacture of elastic membranes, allowing for the incorporation of large quantities of aggregates.

pdfTECHNICAL INFORMATION – ADICRIL® PS-80
Download

Office


  • Anselm Clavé, 40 LOCAL
    08100 Mollet del Vallès. Barcelona. España

  • Tel (+34) 935 707 316
    Fax (+34) 935 709 041

Factory


  • Partida figueral s/n Pol.Ind,17
    43878 Masdenverge. Tarragona. España

  • (+34) 977 719 515

INSTALLATIONS

btt
USO DE COOKIES Utilizamos cookies propias y de terceros, analizando sus hábitos de navegación en nuestra página web, con la finalidad de garantizar la calidad, seguridad y mejora de los servicios ofrecidos a través de la misma. En los casos en que el usuario no manifieste expresamente si acepta o no la instalación de las cookies, pero continúe utilizando nuestra página web, se entenderá que éste ha dado su consentimiento, informándole expresamente de la posibilidad de bloquear o eliminar las cookies instaladas en su equipo mediante la configuración de las opciones del navegador. Puede obtener más información a este respecto consultando nuestra “Política de Cookies”. POLÍTICA DE COOKIES ACEPTAR
Aviso de cookies